เจ้าของร้านค้านี้ ไม่ได้เข้าสู่ระบบเป็นระยะเวลา 20 วัน แล้ว
ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า
Product Description
Automatic lighting hallways, corridors, bathrooms, basements, warehouses, garages, and other places, automatic ventilation exhaust fan and other electrical appliances (incandescent, fluorescent, buzzer, automatic doors, electric fans, dryers and automatic washing machine) especially for use in businesses, hotels, shopping malls, warehouses, sensitive areas or security zones and alarm systems. Can also be used for security purposes.
 
1. Sensing module for about a minute after power initialization time, during the interval to the output module
0-3 times a minute in standby mode.
2. Should avoid direct lighting such as interference sources close the surface of the lens module so as to avoid the
introduction of interference signal generator malfunction; use of the environment to avoid the flow of the wind, the
wind sensor will also cause interference.
3. Sensor module using a dual probe, the probe’s window is rectangular, dual (A per B million) in the direction of
the ends of long, when the body passed from left to right or right to left when the reach the dual IR time, distance
difference, the greater the difference, more sensitive sensors, when the body from the front to the probe or from top
to bottom or from bottom to top direction passing, dual IR not detected changes in the distance, no difference value,
the sensor insensitive or does not work; so the sensors should be installed dual direction of the probe with human
activities as much as possible parallel to the direction of maximum to ensure that the body has been passed by the
dual sensor probe. To increase the sensing range of angles, the module using a circular lens, the probe also makes sense
on all four sides, but still higher than the upper and lower left and right direction of sensing range, sensitivity and
strong, still as far as possible by the above installation requirements.VCC, trig (control side), echo (receiving end), GND
4. Dimensions and Adjustment:
Note: The potentiometer clockwise to adjust the distance, sensing range increases (about 7 meters), on the contrary,
sensing range decreases (about 3 meters).Delay adjustment potentiometer clockwise rotation, sensor delay longer (about 300S),
the other hand, induction by the short delay (about 5S).
 
Features
1, The automatic sensor: to enter the sensor output range is high, people leave the sensor range of the automatic delay off high, output low.
2,The photosensitive control (optional, factory is not set) may set the photosensitive control during the day or light intensity without induction.
3,The temperature compensation (optional, factory is not set): In the summer when the ambient temperature rises to 30 ~ 32, slightly shorter detection range, temperature compensation can be used as a performance compensation.
4, Two trigger mode:
A.Can not repeat the trigger: the sensor output high, the delay time is over, the output will automatically become low from high;
B. Repeatable trigger: the sensor output high after the delay period, if the human body in its sensing range activities, its output will remain high until after the delay will be left high to low (sensor module review measured activities of each body will be automatically extended after a delay time, and the final event of the delay time Starting point of time).
5,With induction blocking time (the default setting: 2.5S block time): sensor module, after each sensor output (high change Into a low level),you can set up a blockade followed by time period, in this time period the sensor does not accept any sensor signal. This feature can have a “sensor output time” and “blocking time” the interval between the work produced can be applied to detect the interval Products; also inhibit this function during load switching for a variety of interference. (This time can be set at zero seconds – Tens of seconds).
6,The working voltage range: the default voltage DC4.5V-20V.
7, Micro-power consumption: static current “50 microamps, especially for battery-powered automatic control products.
8, The output high level signals: types of circuits can be easily and docking.

Specification


Download Data
   
    RAP3270
 
เงื่อนไขอื่นๆ
Tags

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

เมื่อลูกค้าชำระเงินแล้ว ส่งหลักฐานการชำระเงินที่

เมนูแจ้งชำระเงิน 

การจัดส่งสินค้า   

1. ส่งสินค้าผ่าน Flash express 70 บาท ใช้เวลา 1-2 วัน
2. ส่งสินค้าทุกวันจันทร์-เสาร์ จัดส่งสินค้าหลังจากแจ้งโอนภายใน 1-2 วันทำการ

การขอใบกำกับภาษี บิล VAT สำหรับเบิก มหาวิทยาลัย โรงเรียน หน่วยงานราชการ บริษัท ห้างหุ้นส่วน ร้านค้า ฯลฯ
1. ราคาสินค้าที่หน้าเว็บ เป็นราคารวม VAT แล้ว ไม่ต้องเพิ่มเงิน
2. การขอใบกำกับภาษี บิล VAT ให้แจ้งข้อมูลตรงช่อง "เพิ่มเติมถึงร้านค้า" ตอนทำรายการสั่งซื้อ
           1. ชื่อหน่วยงาน เช่น มหาวิทยาลัย โรงเรียน บริษัท ห้างหุ้นส่วน ร้านค้า ฯลฯ
           2. ที่อยู่หน่วยงาน
           3. เลขที่ประจำตัวผู้เสียภาษี
           4. สาขา

โปรดตรวจสอบความถูกต้อง ตัวสะกด เว้นวรรค ของข้อมูลให้เรียบร้อย 
เพราะใบกำกับภาษี ไม่สามารถเปลี่ยนแปลงหรือแก้ไขได้ หลังซื้อสินค้าค่ะ
            
กรณีที่ไม่ได้นำไปใช้เบิก :
ทางร้านออกเป็น ใบส่งของและใบเสร็จรับเงิน/ใบกำกับภาษีอย่างย่อ แนบไปกับสินค้า
บมจ. ธนาคารกสิกรไทย สาขาเดอะพาซิโอลาดกระบัง ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาศูนย์การค้าเดอะพาซิโอ (ลาดกระบัง) ออมทรัพย์

นโยบายการเปลี่ยนหรือคืนสินค้า

นโยบายการเปลี่ยนสินค้า/คืนสินค้า

กรณีขอเปลี่ยนสินค้า
ซึ่งเป็นความความผิดพลาดจากกระบวนการผลิตหรือกระบวนการขนส่ง 

- สามารถเปลี่ยนเป็นชนิดเดิม หรือชนิดใหม่ได้ โดยสินค้าที่เปลี่ยนต้องมีมูลค่าเท่ากับ หรือมากกว่าชนิดเดิม
-  กรณิสินค้าที่เปลี่ยนราคาสูงกว่า ลูกค้า จะต้องชำระเงินเพิ่ม
-  กรณิสินค้าที่เปลี่ยนราคาต่ำกว่า ร้านขอสงวนสิทธิ์การคืนเงินส่วนต่าง
-  ร้านส่งสินค้าผิดรุ่น, สี หรือขนาด ให้กับลูกค้า
-  ร้านจัดส่งสินค้าที่มีลักษณะแตกต่าง หรือไม่มีส่วนคล้ายคลึงกับรูปภาพสินค้าที่ได้แสดงไว้
-  ร้านจัดส่งสินค้าที่มีสภาพชำรุด เสียหาย และไม่สามารถใช้งานได้ ให้กับลูกค้า (ลูกค้าต้องเก็บสินค้าไว้  พร้อมแสดงหลักฐานการซื้อสินค้า)

ร้านจะรับเปลี่ยนสินค้าหลังจากลูกค้าได้รับสินค้าแล้ว ภายใน 7 วัน หากเกินวันดังกล่าว ร้านค้าขอสงวนสิทธิ์ ในการรับคืนสินค้า

กรณีขอคืนเงิน 

จากกรณีสินค้ามีความบกพร่องเสียหายอันเกิดจากผู้ผลิต ลูกค้าได้รับสินค้าไม่ตรงตามใบสั่งซื้อ  สินค้าได้รับความเสียหายระหว่างการจัดส่ง 

เงื่อนไขและวิธิปฏิบัติการคืนเงิน

        -   ร้านจะทำการคืนเงินให้แก่ลูกค้า ในกรณีที่ไม่สามารถหาสินค้า มาเปลี่ยน หรือทดแทนสินค้าเดิมที่ลูกค้าได้สั่งซื้อไป ในกรณีที่สินค้าชำรุดเสียหายจากทางร้าน หรือสินค้าชิ้นนั้นๆหมดไป

         -   กรณีการขอคืนเงิน ลูกค้าจะต้องนำส่งเอกสารและหลักฐาน ใบเสร็จรับเงิน/ใบกำกับภาษี, เลขที่บัญชีโอนเงินของลูกค้า  เพื่อให้ทางร้านดำเนินเรื่องการทำจ่ายเงินคืนเข้าบัญชีของลูกค้า โดยมีระยะเวลาประมาณ 10-15 วันทำการ และ ทางร้านจะทำการแจ้งให้ลูกค้าทราบเมื่อได้มีการจ่ายเงินคืนเรียบร้อยแล้ว

รายการสั่งซื้อของฉัน
เข้าสู่ระบบด้วย
เข้าสู่ระบบ
สมัครสมาชิก

ยังไม่มีบัญชีเทพ สร้างบัญชีใหม่ ไม่มีค่าใช้จ่าย
สมัครสมาชิก (ฟรี)
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านRAPELEC
RAPELEC
จัดจำหน่ายอะไหล่อิเลคทรอนิกส์
เบอร์โทร : 0950726511
อีเมล : rapelecsales@gmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม